GST : 07APKPS1463E1ZT
Send Inquiry
Dwyer 2-5000-125PA Minihelic II Differential Pressure Gauge 0-125 Pa
4000 INR/Piece
Product Details:
- Product Type Minihelic II Differential Pressure Gauge
- Usage Industrial
- Weight 6 oz (170.1 g) Grams (g)
- Size 67 mm
- Color Black
- Material Other
- Dial Material Glass
- Click to View more
X
Dwyer 2-5000-125PA Minihelic II Differential Pressure Gauge 0-125 Pa Price And Quantity
- 5 Piece
- 4000 INR/Piece
- 1.00 - 1.00 INR/Piece
Dwyer 2-5000-125PA Minihelic II Differential Pressure Gauge 0-125 Pa Product Specifications
- Glass
- Black
- 67 mm
- 5% of FS at 70F (21.1C) mm
- Panel
- 6 oz (170.1 g) Grams (g)
- 67 Millimeter (mm)
- 0-125 Pa
- Industrial
- Steam Oil Gas
- Minihelic II Differential Pressure Gauge
- Plastic
- Standard
- Other
- Matte Polished Galvanized
Dwyer 2-5000-125PA Minihelic II Differential Pressure Gauge 0-125 Pa Trade Information
- Delhi
- Cash Against Delivery (CAD) Cash on Delivery (COD) Cash in Advance (CID) Cash Advance (CA)
- 1 Piece Per Week
- 1 Week
- Websites : www.dpengineers.in www.dpengineer.in www.dpengineers.co.in www.dpengineer.co.in www.dpengineersindia.com www.dpengineerindia.com www.dpengineersindia.in www.dpengineers.info www.dpengineer.info www.dp-engineers.com www.dpengineerindia.in www.dpengineersindia.net www.dpengineersdelhi.co.in www.dpengineersdelhi.com www.dpengineersdelhi.net
- Middle East Asia
- Himachal Pradesh Andaman and Nicobar Islands Pondicherry Uttarakhand Daman and Diu Dadra and Nagar Haveli Lakshadweep All India South India East India West India Assam Arunachal Pradesh Bihar Chandigarh Goa Jammu and Kashmir Jharkhand Karnataka Maharashtra Mizoram Meghalaya Punjab Rajasthan Sikkim Telangana Tripura Manipur West Bengal Nagaland Delhi Gujarat Tamil Nadu Madhya Pradesh Haryana North India Andhra Pradesh Uttar Pradesh Kerala Central India Odisha Chhattisgarh
Product Description
Dwyer 2-5000-125PA Minihelic II Differential Pressure Gauge 0-125 PaModel:Â 2-5000-125PA
Housing is Molded From Strong Mineral And Glass Filled Nylon. Pointer Stops Of Molded Rubber Prevent Pointer Over Travel Without Damage.
Dwyer 2-5000-125PA MINIHELIC II, DIFFERENTIAL PRESSURE GAUGE, 0/125 PA
- Housing is molded from strong mineral and glass filled nylon.
- Pointer stops of molded rubber prevent pointer over-travel without damage.
- Full view lens is removable and molded of tough acrylic.
- Aluminum scale litho-printed black on white, enhances readability.
- Red tipped aluminum pointer, rigidly mounted to helix is easy to see.
- Wishbone assembly provides mounting for helix, helix bearings, and pointer shaft.
- Jewel bearings provide virtually friction-free helix motion.
- Helix is free to rotate in jewel bearings. It aligns with magnetic field of magnet to transmit pressure indications to pointer.
- Zero adjustment screw, located behind the removable lens, eliminates tampering.
- Range spring calibration clamp fixes live length of spring for proper gauge calibration and is factory set and sealed.
- Silicone rubber diaphragm allows accurate response to a broad range of temperatures and at extremely low pressure. Incorporates blow out area for overpressure protection.
- Diaphragm support plates of lightweight aluminum on each side of the diaphragm minimize position or attitude sensitivity and help define pressure area.
- Flat leaf range spring reacts to pressure on the diaphragm. Live length is adjustable for calibration. Small amplitude of motion minimizes inaccuracies and assures long life.
- Low pressure tap connects to rear chamber.
- Coil spring link provides a resilient connection between the diaphragm and the range spring.
- Ceramic magnet mounted on a molded bracket at the end of the range spring rotates the helix without direct mechanical linkage.
- High pressure tap connects with the front chamber through passageway in the plastic case and a sealing ring molded into the edgeof the diaphragm.
Dwyer 2-5000-125PA Specifications
| Service | Air and compatible gases |
| Housing | Glass filled nylon polycarbonate lens |
| Accuracy | ±5% of FS at 70°F (21.1°C) |
| Pressure Limits | 30 psig (2.067 bar) continuous to either pressure connection |
| Temperature Limits | 20 to 120°F (-6.67 to 48.9°C) |
| Mounting Orientation | Diaphragm in vertical position |
| Process Connections | Barbed, for 3â„16" ID tubing (standard) ???" male NPT (optional) |
| Weight | 6 oz (170.1 g) |
| Agency Approvals | Meets the technical requirements of EU Directive 2011/65/EU (RoHS II) |
Enter Buying Requirement Details
Other Products in 'series 2-5000 | minihelic ii differential pressu' category
D. P. ENGINEERS
All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Private Limited.
Developed and Managed by Infocom Network Private Limited.
