GST : 07APKPS1463E1ZT
Send Inquiry
Dwyer 2-5000-0 Minihelic II Differential Pressure Gauge 0-0.5 INCH
4000 INR/Piece
Product Details:
- Weight 6 oz (170.1 g) Grams (g)
- Product Type Minihelic II Differential Pressure Gauge
- Size 63 mm
- Color Black
- Usage Industrial
- Material Other
- Dial Material Glass
- Click to View more
X
Dwyer 2-5000-0 Minihelic II Differential Pressure Gauge 0-0.5 INCH Price And Quantity
- 4000 INR/Piece
- 1.00 - 1.00 INR/Piece
- 5 Piece
Dwyer 2-5000-0 Minihelic II Differential Pressure Gauge 0-0.5 INCH Product Specifications
- Glass
- 6 oz (170.1 g) Grams (g)
- 0-0.5 INCH
- 67 Centimeter (cm)
- 63 mm
- Black
- Minihelic II Differential Pressure Gauge
- Panel
- Other
- Plastic
- Steam Oil Gas
- Meets the technical requirements of EU Directive 2011/65/EU (RoHS II) mm
- Industrial
- Standard
- Matte Polished Galvanized
Dwyer 2-5000-0 Minihelic II Differential Pressure Gauge 0-0.5 INCH Trade Information
- Delhi
- Cash on Delivery (COD) Cash Against Delivery (CAD) Cash in Advance (CID) Cash Advance (CA)
- 1 Piece Per Week
- 1 Week
- Websites : www.dpengineers.in www.dpengineer.in www.dpengineers.co.in www.dpengineer.co.in www.dpengineersindia.com www.dpengineerindia.com www.dpengineersindia.in www.dpengineers.info www.dpengineer.info www.dp-engineers.com www.dpengineerindia.in www.dpengineersindia.net www.dpengineersdelhi.co.in www.dpengineersdelhi.com www.dpengineersdelhi.net
- Middle East Asia
- Tripura Chandigarh Himachal Pradesh Manipur Andaman and Nicobar Islands Pondicherry Uttarakhand Daman and Diu Dadra and Nagar Haveli Lakshadweep Chhattisgarh South India East India Andhra Pradesh Assam Arunachal Pradesh Bihar Goa Haryana Jammu and Kashmir Jharkhand Karnataka Madhya Pradesh Mizoram Meghalaya Rajasthan Sikkim Tamil Nadu Telangana West Bengal Nagaland Maharashtra Gujarat Delhi North India Punjab Uttar Pradesh Kerala Central India Odisha West India All India
Product Description
Dwyer 2-5000-0 Minihelic II Differential Pressure Gauge 0-0.5 INCHHousing Is Molded From Strong Mineral And Glass Filled Nylon. Pointer Stops of Molded Rubber Prevent Pointer Over Travel Without Damage.
Dwyer 2-5000-0 MINIHELIC II, DIFFERENTIAL PRESSURE GAUGE, 0/0.5
- Housing is molded from strong mineral and glass filled nylon.
- Pointer stops of molded rubber prevent pointer over-travel without damage.
- Full view lens is removable and molded of tough acrylic.
- Aluminum scale litho-printed black on white, enhances readability.
- Red tipped aluminum pointer, rigidly mounted to helix is easy to see.
- Wishbone assembly provides mounting for helix, helix bearings, and pointer shaft.
- Jewel bearings provide virtually friction-free helix motion.
- Helix is free to rotate in jewel bearings. It aligns with magnetic field of magnet to transmit pressure indications to pointer.
- Zero adjustment screw, located behind the removable lens, eliminates tampering.
- Range spring calibration clamp fixes live length of spring for proper gauge calibration and is factory set and sealed.
- Silicone rubber diaphragm allows accurate response to a broad range of temperatures and at extremely low pressure. Incorporates blow out area for overpressure protection.
- Diaphragm support plates of lightweight aluminum on each side of the diaphragm minimize position or attitude sensitivity and help define pressure area.
- Flat leaf range spring reacts to pressure on the diaphragm. Live length is adjustable for calibration. Small amplitude of motion minimizes inaccuracies and assures long life.
- Low pressure tap connects to rear chamber.
- Coil spring link provides a resilient connection between the diaphragm and the range spring.
- Ceramic magnet mounted on a molded bracket at the end of the range spring rotates the helix without direct mechanical linkage.
- High pressure tap connects with the front chamber through passageway in the plastic case and a sealing ring molded into the edgeof the diaphragm.
| Service | Air and compatible gases |
| Housing | Glass filled nylon polycarbonate lens |
| Accuracy | ±5% of FS at 70°F (21.1°C) |
| Pressure Limits | 30 psig (2.067 bar) continuous to either pressure connection |
| Temperature Limits | 20 to 120°F (-6.67 to 48.9°C) |
| Mounting Orientation | Diaphragm in vertical position |
| Process Connections | Barbed, for 3â„16" ID tubing (standard) ???" male NPT (optional) |
| Weight | 6 oz (170.1 g) |
| Agency Approvals | Meets the technical requirements of EU Directive 2011/65/EU (RoHS II) |
Enter Buying Requirement Details
Other Products in 'series 2-5000 | minihelic ii differential pressu' category
D. P. ENGINEERS
All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Private Limited.
Developed and Managed by Infocom Network Private Limited.
